&nsp;

AutoVent Automatic Shelter Vent Kit

Model #11300
 
$38.49
- +
OR
Product Overview

Details

Keep your shelter cool and dry with AutoVent, the ultimate ventilation system for your shelter. Vent automatically opens and closes based upon the interior temperature. Reduce humidity and moisture buildup in your fabric garage or shelter. A bimetallic spring, which is heat sensitive, begins to open the vent at 74 degrees, fully opened at 104 degrees. When the interior temperature cools down, the vent begins to close up.

*Quantity of 2 vents per box.

Specifications

Specifications

SKU 11300
Assembly Manual Download (PDF)
Color White
Assembly Required Yes
Warranty 1 year
Reviews
AutoVent Automatic Shelter Vent Kit is rated 4.2 out of 5 by 6.
Rated 5 out of 5 by from Helps reduce interior temps This seems to be doing a good job at passively lowering the temperatures in our 14x32 structure. Even on mild days, our previous tent would get incredibly hot inside with the end flaps closed. I think that may have been partially responsible for the early deterioration and failure of our previous structure. Only time will tell, but so far we are pleased with this vent system. No power or attention on our part required.
Date published: 2016-10-21
Rated 5 out of 5 by from Great addition to shelter! Takes 2 people to install, but only takes about 30 min to do.
Date published: 2016-10-06
Rated 5 out of 5 by from THE AUTO OPENING VENT REALLY WORKS THE INSTALLATION WORKS BEST WITH TWO PEOPLE. INSTALLATION MAY WORK WITH ONE PERSON WITH THE END WALLS LOOSE ON THE GROUND, SO YOU CAN ROLL IT UP AND REACH BOTH SIDES. THE INSTRUCTIONS FORGOT TO MENTION INSTALLING THE SCREW AND WASHER THAT HOLDS THE MOVING VENT TO IT'S PIVOT SHAFT. I WAS ABLE TO CATCH THAT AFTER THE FIRST ONE AND INSTALL IT LATER OK. NOW IT IS EQUAL TEMPERATURE INSIDE AND OUT OF SHED. IT USED TO BE LIKE AN OVEN INSIDE ,EVEN WITH THE DOOR OPEN. QUIETLY WORKS NICELY! THANK YOU
Date published: 2016-08-19
Rated 4 out of 5 by from Auto Vent Easy to install, work great, Just wish there was a fan option
Date published: 2017-09-05
Rated 4 out of 5 by from 2 peeps to install, plastic rivets work I took out the auto vent by removing the screw for the fins and then using a roto drill to cut inside the ring to make a larger opening. I want the vent open all the time to get constant airflow and help keep the moisture out which is a problem in the spring/fall larger temperature swings. The directions show one person can install the vent. You definitely need two people and it wasn't that easy to push the plastic rivets thru as they liked to bend. The screen should be slightly larger as it didn't easily come out to the rivet holes to stay in place. All in all the vent seems to work fine and stay in place fine with the plastic rivets so far(about 1 week with some wind). The price seemed a little high for what you get.
Date published: 2017-07-17
Rated 2 out of 5 by from Vent is not opening I bought these for my (2) 13'x20'x10' shelters because it was getting extremely hot in them. I am a little concerned about the function of it. On mine, the part that "opens" seems to rub the mating surface. So far it is still hot in there (98 degrees) and they are not opening. I love the shelters, not too happy with the vents.
Date published: 2017-09-14
  • y_2017, m_9, d_16, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_11300, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_shelterlogic
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 92.09ms
  • REVIEWS, PRODUCT
Q&A

Are Vent kits good for the shelterlogic model # 74332?

Asked by: Richie
Hello, Yes the vent kit will work on model 74332. Thank you
Answered by: ShelterLogic
Date published: 2017-08-29

Will this work with the ShelterLogic 12 x 28 x 8 Round Portable Garage Canopy - 76632? Thanks!

Asked by: laoks
Hello, Yes this vent kit will work with model 76632. Thank you!
Answered by: ShelterLogic
Date published: 2017-08-29

Can this be put on the doors or end flaps instead of the main tarp? I mean I just spent $700 and now to use these I need to cut my $700 garage? Doesn't exactly make sense to me nor worth destroying your garage. Probably voids warranties to.

Asked by: Tech 2
Hello, Installing the vent kits will not void your warranty. Since the material is rip stop it will not rip beyond your designated cuts. These should be installed in the front and back panels, not the main cover. Thank you
Answered by: ShelterLogic
Date published: 2017-06-21

when cutting the opening for this vent what will keep the hole from opening more? is there a repair kit, stitch, fold and flap method ? a punch or drill for the rivets? what tools and other products that might be needed?

Asked by: Freeway
Material is not rip stop I can grab it and rip it with ease. I bet 7 out of 10 installs rip where you attach the door because it's already preripped from factory doesn't have stitch support like it should to prevent tearing during install. I use duct tape works great to prevent further tearing of the Pre ripped door slots .
Answered by: Tech 2
Date published: 2017-06-19

Is there room above the doors on the Accelaframe model greenhouses to install these fans?

Asked by: Chuck2
Hi Chuck, Model 70693 (Accelaframe greenhouse) comes with a zippered vent in the front door. This automatic vent kit would not be able to fit. If you have any additional questions, please let us know. Thank you
Answered by: ShelterLogic
Date published: 2017-02-28

i keep reading "fabric shelters" in info but is it ok 2install on an arrow hamlet shed (HM86)?? will it help w/condesensation inside shed? will warranty be voided by adding this?

Asked by: blitzen
Hello, We do not recommend using this vent kit on the Arrow Sheds as it requires you to cut a 12" square into the material. We would not recommend doing this on a steel shed. Thank you
Answered by: ShelterLogic
Date published: 2017-01-09

does this void the rip tear of my shelter? does this accessory come with a cut out template, instructions? my gable ends do not have this can it be added to any shelter?

Asked by: Freeway
Hello, Since the material on our shelters is rip stopped, the cut out required for the vent kit would not void any warranty or cause the cover the rip. Instructions are included with this vent kit, the section that needs to be cut out is a 12x12 square. This vent can be added to many of our shelters after they are insalled. Thank you
Answered by: ShelterLogic
Date published: 2017-01-03

Could this work for the 10x10x8 Grow-it Greenhouse?

Asked by: JoeC
The vent kit should be installed in the front and rear panels. Since the Greenhouse already has a vent in place, there would not be enough room to install the vent kit. If you have any questions, please feel free to give us a call at 1800-932-9344. Thank you
Answered by: ShelterLogic
Date published: 2017-01-27
  • y_2017, m_9, d_16, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_11300, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_shelterlogic
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 64.41ms
  • QUESTIONS, PRODUCT

Features & Benefits

Big quality features. Value priced. Learn more about this product below.

  • A bimetallic spring, which is heat sensitive begins to open the vent at 74 degrees, fully opened at 104 degrees; and closes automatically when the inside temperature cools down.

  • Reduces humidity and moisture buildup in your fabric garage or shelter

  • Easy to install with 2-sided plastic pop rivets

  • Fits with any fabric covered Instant Garage or storage shelter

  • Vents are screened to keep out insects and debris