Replacement Cover Kits

Need a ShelterLogic Replacement Cover Kit?

ShelterLogic products are built strong and made to last, but several seasons of use can wear canopy covers down. That’s why we’ve developed the ShelterLogic Replacement Cover Kit Program to help you get the most out of your ShelterLogic shade and shelter.

See ALL Replacement Covers

Shop now

How to Find My Cover Number?

STEP ONE: Locate Your Cover Number

Each ShelterLogic cover has an identifying reorder part number located on a white tag or sticker on the inside of the cover. Whether you are looking for a soft top gazebo replacement cover or carport tarp replacement, you can usually locate your reorder part number on the inside corner of your building or shelter.

STEP TWO: Enter Your Cover Number in the Searchbar

In the search field above, enter the reorder part number you found on the inside of your ShelterLogic cover. Make sure this is the number on the cover itself and not on the door or back panels.

Didn’t find your cover number or need assistance choosing a ShelterLogic replacement cover? We’re here to help!

ShelterLogic offers replacement canopy cover kits on many of our products, but not all of them are available to order online. If you were unable to find the replacement cover for your shelter:

Call our Customer Service Department today at 1-800-746-8764!

Choosing Your Cover

Our covers come in a variety of different cover weights and strengths. To help you choose the ShelterLogic replacement cover kit for your ShelterLogic Garage, Shed, AutoShelter or Carport, we’ve created a chart below.

Standard Replacement Canopy Cover	Heavy Duty 14.5 Oz. Cover	Ultra Duty 21.5 Oz. Cover
UV Treated	UV Treated	UV Treated
100% Waterproof	100% Waterproof	100% Waterproof
1-Year Prorated Warranty	10-Year Prorated Warranty	15-Year Prorated Warranty
1-Year Warranty For Panels	3-Year Warranty For Panels	3-Year Warranty For Panels

Why Order Carport, Canopy and Gazebo Replacement Covers from ShelterLogic

At ShelterLogic, we’re committed to providing products that are designed with durability and convenience in mind. Whether you’re looking for a carport or gazebo replacement cover, you’ll find that our products come ready to install and constructed with the same quality materials and workmanship of your original canopy. Ripstop triple layer woven polyethylene fabric is built to last season after season, and heat welded seams provide a stronger bond and 100% water resistance for tough conditions.

Not to mention, these replacement covers are treated with anti-aging, anti-yellowing, and antimicrobial agents, as well as UV protection, blocking 98% of harmful UV rays and shielding against fading. ShelterLogic replacement covers attach quickly and can be installed in as little as 15 minutes. Plus, at affordable prices, there’s no need to go looking for cheap tarps or aftermarket covers that will wear quickly.

Need a CoverIT Cover? Not a Problem.

ShelterLogic has CoverIT covers available to order. Give us a call and one of our customer service representatives will help you purchase a replacement cover for your CoverIT frame.

Contact a representative: 1-800-746-8764

ShelterLogic Customer Service is available Monday – Friday 8:00 am to 8:00 pm and Saturday and Sunday 8:00 am to 4:30 pm Eastern Standard Time.

How to Measure a Peak CoverIT Frame

See the proper way to measure your Peak CoverIT frame for a replacement cover.

Measuring a round CoverIT frame can be completed in just a few simple steps. Watch the video above to see the proper way to measure your round CoverIT frame for a replacement cover, or follow the written directions below. The following instructions will guide you through measuring for round cover replacement:

1. Measure the overall width of the building.
2. Use a straight edge to mark where the bend begins on each leg, then measure from the outside of the building at the marks.
3. Measure from the ground to the center of the cover rail on both sides.
4. Measure the overall height of the building.
5. Measure the length of the building from the center of the first rib to the center of the last rib.
6. Select the attachment style: (A) ratchet rail, (B) pocket rail, © lace rail, or (D) Z-rail.
7. Measure the diameter of the rib pipe.
8. Measure the perimeter of the rib with rope, starting at the ground level. Then, measure the length of the rope.

How to Measure a Round CoverIT Frame

See the proper way to measure your Round CoverIT frame for a replacement cover.